PA-EVOH Multi-Layer Film In Coil H. 1150 mm – Length 360 m

PRODUCT DESCRIPTION

Disinfestation technology in a controlled atmosphere is the natural ecologic alternative to treatments based on toxic harmful substances such as methylbromide, ethylene oxide, and formaldehyde.

The principle of Disinfestation in a controlled atmosphere is based simply on modifying the proportion of gases which are present in the air we normally breathe every day and, in particular, on reducing the amount of oxygen while increasing the amount of nitrogen, thus determining the death by anoxia of biotic agents at all stages of development (egg, larvae, chrysalis, adult).

This mature and proven technology is highly effective and non-pollutant; it leaves no residues and does not interact with the materials under treatment.

The process can be repeated from time to time and totally eliminates the risk of interaction or reaction of the materials the protected item is made of and it excludes therefore all risks of exposing these items to an accelerated decomposition process.

This system is ideal also for long term preservation of the said objects, protecting them from biotic agents, dust and atmospheric pollution.

Isosep Mistral D Mobile is a portable wheeled integrated system of anoxic disinfestation, by means of nitrogen, that operates independently and automatically and is set and controlled by a dedicated software installed on the laptop.

This device can produce high purity nitrogen by making use of advanced technologies based on the molecular separation of common atmospheric gas.

The system allows the treatment of the artefacts both in a controlled atmosphere and in a modified atmosphere.

The treatment begins preparing one or more plastic bags inside which the items to be treated are placed.

These bags are connected to Isosep Mistral D Mobile with a special pipe and fittings.

Once the desired values have been set using the software (Residual Oxygen and Relative Humidity) the system will be able to operate automatically for the duration of the treatment, bringing at full capacity the artefact contained in the bubble and ensuring the maintenance of the set values, switching off and on depending on the needs.

ISOSEP Mistral D Mobile guarantees to work in full safety for the operator and the environment, carrying out constantly also the environmental analysis of oxygen, alternated with the analysis inside the bag, whose values will be handled automatically by the software. In case of anomalous environmental values, the software will stop the operation of the entire system warning the operator through the installed alarm (acoustic and visual).

The System allows you to work on several bags at the same time.

The System allows the calibration of the oxygen sensor directly from the integrated control panel.

ISOSEP MISTRAL D MOBILE is composed of: – Structure in painted steel Structure in steel painted with epoxy powders, with handlebar and casters (two of them swivel with lock). Dimensions: 450x880xh.1310 mm. Weight approx. 140 kg – Molecular separation unit This device can produce high purity nitrogen by making use of a system based on the molecular separation of common atmospheric gas, whose predominant part is composed by nitrogen.

As no gas or other combustible material are involved in the process, the system is not subjected to particular safety regulations and can be set up everywhere.

Besides, the air molecular separation does not produce undesirable gas nor other impurities. – OILESS compressor assembly Oilless compressor, mounted on shielded bearings lubricated inside with a special grease resistant to high temperatures; the connecting shaft is borne by both sides so to reduce at full the possible breakings and diminish the efforts that the electric motor has to suffer.

The labyrinth suction is innovative and makes the pumping group noiseless. – Electronic analyser Electronic analyser with electrochemical cell for the purity control of the generated nitrogen, complete with a pump for air sample intake