Microsandblasters CTS 5

MICROSANDBLASTER CTS 5 A portable precision aeroabrasive instrument with electronic control, for studio and site work. It is indispensable to the restorer for cleaning stone and wooden artifacts, archaeological finds, mosaics, frescoes, etc. CTS 5 is equipped with an electronic device which blocks the vibrating group for about 3 minutes in case of overheating (the warning light goes on). After cooling it starts again. CTS 5 allows the abrasive material to flow uninterruptedly and homogeneously. The abrasive quantity can be varied independently from the working pressure. CTS 5 is made up of: – a microsandblasting group with manometer and precision pressure regulator – an electronic vibrating group with on/off light switch and a regulator with warning light, placed on the control panel – a column tank with safety valve on the plug – a nozzle in tungsten carbide, ø 1.1 mm (fitted on the pen) The microsandblaster CTS 5 is available with the following control versions (according to requirements): – CTS 5/A anatomic microsandblasting pen with electric built-in starting button and connection tubes – CTS 5/B microsandblasting pen, electric pedal and connection tubes EQUIPMENT: – 1 nozzle in tungsten carbide, ø 0.7 mm – 1 nozzle in tungsten carbide, ø 1.4 mm – 1 nozzle protecting joint – 1 linen tube, 1.5 m long – 1 funnel in polyethylene, ø 100 mm – 1 jar of white aluminium oxide # 150, 500 g – 1 jar of white aluminium oxide # 180, 500 g – 1 jar of white aluminium oxide # 220, 500 g – 1 metal stiff case dim. 480x350xh.380 mm TECHNICAL SPECIFICATIONS: – Power supply: 220V single-phase 50-60Hz – Pen/pedal voltage: 24V – Working pressure: from 0.1 to 6 bar – Consumption of compressed air: 60 – 80 l air/min – Size: 23x30xh 31 cm – Weight: 16,80 kg (empty weight)