Nozzle in Tungsten Carbide ø 1.1 mm For Micro/Hydro-Sanblasters CTS

PRODUCT DESCRIPTION

MICROSANDBLASTER CTS 1 A portable precision aeroabrasive instrument for studio and site use which works with compressed air. It is indispensable to the restorer for cleaning stone and wooden artifacts, archaeological finds, mosaics, frescoes, etc. CTS 1 is made up of: – a microsandblasting group with manometer and pressure regulator – a transparent column tank to check continuously the level of the abrasive material – a CTS 1/A anatomic microsandblasting pen with built-in starting button and junction tube to the microsandblaster – a nozzle in tungsten carbide, ø 1.1 mm (fitted on the pen) EQUIPMENT: – 1 nozzle in tungsten carbide, ø 0.7 mm – 1 nozzle-protecting joint – 1 linen tube, 1.5 m long – 1 funnel in polyethylene, ø 100 mm – 1 jar of white aluminium oxide # 150, 500 g – 1 jar of white aluminium oxide # 180, 500 g – 1 jar of white aluminium oxide # 220, 500 g – 1 rugged carrying case, size 447X412x107 mm TECHNICAL SPECIFICATIONS: – Input: compressed air – Working pressure: from 0.1 to 6 bar – Consumption: 60 – 80 l air/min – Size: 16×10.5xh 28 cm – Weight: 2.6 kg (empty weight)

MICROSANDBLASTER CTS 2 A portable precision aeroabrasive instrument for studio and site use. It works with compressed air and is indispensable to the restorer for cleaning stone and wooden artifacts, archaeological finds, mosaics, frescoes, etc. CTS 2 can be used simultaneously by two operators, using different abrasives and/or granulometries. CTS 2 it is made up of: – 2 microsandblasting groups with separate manometers and pressure regulators – 2 transparent column tank to check continuously the level of the abrasive material – 2 microsandblasting anatomic pens CTS 1/A with built-in starting button and junction tube to the microsandblaster – 2 nozzles in tungsten carbide, ø 1.1 mm (fitted on the pens) EQUIPMENT: – 1 nozzle in tungsten carbide, ø 0.7 mm – 1 nozzle in tungsten carbide, ø 1.4 mm – 2 nozzle protecting joints – 2 linen tubes, 1.5 m long – 1 funnel in polyethylene, ø 100 mm TECHNICAL SPECIFICATIONS: – Input: compressed air – Working pressure: from 0.1 to 6 bar – Consumption: 60 – 80 l air/min – Size: 20x16xh 28 cm – Weight: 4.3 kg (empty weight)

MICROSANDBLASTER CTS 5 A portable precision aeroabrasive instrument with electronic control, for studio and site work. It is indispensable to the restorer for cleaning stone and wooden artifacts, archaeological finds, mosaics, frescoes, etc. CTS 5 is equipped with an electronic device which blocks the vibrating group for about 3 minutes in case of overheating (the warning light goes on). After cooling it starts again. CTS 5 allows the abrasive material to flow uninterruptedly and homogeneously. The abrasive quantity can be varied independently from the working pressure. CTS 5 is made up of: – a microsandblasting group with manometer and precision pressure regulator – an electronic vibrating group with on/off light switch and a regulator with warning light, placed on the control panel – a column tank with safety valve on the plug – a nozzle in tungsten carbide, ø 1.1 mm (fitted on the pen) The microsandblaster CTS 5 is available with the following control versions (according to requirements): – CTS 5/A anatomic microsandblasting pen with electric built-in starting button and connection tubes – CTS 5/B microsandblasting pen, electric pedal and connection tubes EQUIPMENT: – 1 nozzle in tungsten carbide, ø 0.7 mm – 1 nozzle in tungsten carbide, ø 1.4 mm – 1 nozzle protecting joint – 1 linen tube, 1.5 m long – 1 funnel in polyethylene, ø 100 mm – 1 jar of white aluminium oxide # 150, 500 g – 1 jar of white aluminium oxide # 180, 500 g – 1 jar of white aluminium oxide # 220, 500 g – 1 metal stiff case dim. 480x350xh.380 mm TECHNICAL SPECIFICATIONS: – Power supply: 220V single-phase 50-60Hz – Pen/pedal voltage: 24V – Working pressure: from 0.1 to 6 bar – Consumption of compressed air: 60 – 80 l air/min – Size: 23x30xh 31 cm – Weight: 16,80 kg (empty weight)